Wind power slip rings are designed to meet the specific requirements of wind turbine applications, considering factors such as weather resistance, high current and voltage capacity, durability, and low maintenance needs. These slip rings contribute to the efficient and reliable operation of wind turbines by enabling the transmission of electrical signals and power across the rotating and stationary components of the system.Contact us
Bagues collectrices SP
Bagues collectrices de signaux standard
- Bagues collectrices Ethernet
- Bagues collectrices de signaux vidéo
- Bagues collectrices pour bus de terrain industriels
- Bagues collectrices USB
Bagues collectrices électriques standard
- Bagues collectrices à trou traversant (série à trou traversant)
- Bagues collectrices à capsule (série Capsule)
- Bagues collectrices à trou traversant (série Pancake)
- Bagues collectrices à trous traversants (série à connexion par broches)
- Bagues collectrices à capsule (série séparée)
Joints rotatifs RF et fibre optique
- Joints rotatifs électro-optiques
- Joint rotatif à fibre optique
- Joints rotatifs RF
- Joint rotatif RF avec bagues collectrices intégrées
Raccords rotatifs (liquides, vide, gaz + électricité)
Bagues collectrices série haute intensité
Wind Turbines Slip Rings SPT038-0722-12S
| product application |
|---|
| Wind energy industry |
| Wind turbine |
| Product_parameters |
|---|
| Model Code：SPT038-0722-12S |
| Current (A)：7×22A+12×signaux |
| Number of channels：19 |
| Inner diameter (mm)：38mm |
| Protection level：IP54 |
| Product features |
|---|
| Military-grade electroplating |
| Wear-resistant, low contact resistance |
| Independent module design without interference |
Product appearance diagram
Wind power slip rings are designed to meet the specific requirements of wind turbine applications, considering factors such as weather resistance, high current and voltage capacity, durability, and low maintenance needs. These slip rings contribute to the efficient and reliable operation of wind turbines by enabling the transmission of electrical signals and power across the rotating and stationary components of the system.
| Electronic and Electrical Characteristics | Mechanical Properties | Environmental Characteristics | |||
| Number of circuits | 19 |
Rotating speed | 0~300rpm | Temperature | -40°C~+80°C |
| Current | 7*22A+12*Signal | Contact material | Precious metal | Humidity | ≤60%RH |
| Voltage | 400VAC/24VDC | Housing material | Aluminum alloy |
Protection Grade |
IP54 |
| Dielectric strength |
21000VAC@50Hz (Current) 2300VAC@50Hz (Signal) |
Wire type | AWG14 |
Others | |
| Insulation resistance |
500MΩ@500VDC (Current) 100MΩ@100VDC(Signal) |
Wire length |
Stator:1500mm Rotor:250mm |
Life span | Can be customized |
